The new Atra Ace Manual feed incorporates the Smart-stop / Rapid Feed Technology.
This new feature is a breakthrough in the Manual drill market, formally only found on the high end Nitto Kohki Automatic drills.
The advanced technology featured in our AO-5575A displays the current drill status via the LED load indicator providing greater control for the operator.
The steel fabrication industry can now experience a cutting edge drill management system designed solely around saving time and money.
• Manual feed
• For smooth cutting of deep and large holes
• A real work horse
• New powerful single speed motor 520rpm
• 1020kg/f double rectangular magnet
• Cuts up to ø55mm thru 75mm plate
• One-touch arbor
• Supplied in sturdy carry case
ADVANCED SAFETY SYSTEM
• Built-in motion sensor: If any lateral movement or excess vibrations detected, the drill stops instantly. Nitto Kohki are the first company to incorporate this feature into magnetic base drills
• Over-load Shutdown / Side-slip: When excessive load or side-slipping is detected during the drilling process, the drill motor will automatically shutdown protecting itself from damage. Once overloaded, the motor 'Start' switch is required to be depressed to resume drilling.
• Fail-safe Restart: In the event of a power loss while drilling, the drill will not restart even after power is resupplied. The motor 'Start' switch is required to be depressed to resume drilling.
• Magnet Open-Circuit Sensor: The drill will not start if the magnet fails to energize due to an open field or faulty wire.
|Voltage||220 ~ 240V 50/60Hz AC|
|No Load Speed||350rpm (50Hz) / 650rpm (60Hz)|
|Magnetic Holding Power||10kN|
|Magnetic Power Consumption||30W|
|Magnet Dimension||86 x 170mm|
|Cutter Diameter on JET-BROACH Cutter||Maximum 55mm|
|Plate Thickness on JET-BROACH Cutter||9 ~ 75mm|
|Cutter Diameter on HI-BROACH Cutter||Maximum 50mm|
|Plate Thickness on HI-BROACH Cutter||9 ~ 50mm|
|Cutter Diameter on AUSTBROACH Cutter||Maximum 50mm|
|Plate Thickness on AUSTBROACH Cutter||9 ~ 50mm|
1 Year Local Manufacturer Warranty
WHAT'S IN THE BOX
1x NITTO KOHKI AO-5575 Atra Ace Portable Magnetic Drilling Machine 1150W
1x Pilot Pin
1x 3mm Hex Socket Screw Key
1x 5mm Hex Socket Screw Key
1x Cutting Oil 0.5L
1x Chain Accessories
1x Side Accessories
1x 8x10mm Spanner
1x Guard Accessories
|Maximum Speed (RPM)||0 - 499|
|Motor Brush Type||N/A|
|Power Tools Included||Allen Key/Wrench, Attachments, Side Handle|
|Battery Amp Hour||N/A|
|Number of Batteries Included||N/A|