POTENZA PS-130 Automatic Self Priming Water Pump 1"
POTENZA PS-130 has been designed to pump neutral clean liquids in which no abrasive solids are suspended at temperature no more than 80°C (60°C for electric pumps with plastic impellers or diffusers)
The system consists of a water pump, an airtight pressure tank, and a pressure switch. The specially designed structure make it better appearance and performance. The pressure tank with a non-toxic rubber membrane, or called pressure vessel, has been pre-filled with air pressure of about 0.12 Mpa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic appliances and industrial applications, and will ensure enough water to supply all user outlets
FEATURES
• Stainless Steel Shaft
• Automatic Pump
• Thermally Protected
• Arrow for Inlet/Outlet
SPECIFICATIONS
| Input Voltage | 230V AC 50Hz |
|---|---|
| Horsepower | 0.32HP |
| Max Suction Lift | 9m |
| Max Head | 40m |
| Max Flow Rate | 35 L/min |
| Pressure Switch on | 1.1 kg/cm2 |
| Pressure Switch off | 1.8 kg/cm2 |
| Max Speed | 2,850rpm |
| Inlet/Outlet Size | 25mm (1") |
WARRANTY INFORMATION
3 Months Local Manufacturer Warranty
WHAT'S IN THE BOX
1x POTENZA PS-130 Automatic Self Priming Water Pump 1"
1x Operating Manual
| Brand | POTENZA |
|---|---|
| Horsepower (HP) | 0.3 |
| Flow Rate (Litre/min) | 30 - 39 |
| Power Type | Corded Electric |
| Voltage (V) | 230V Single Phase |
| Inlet Diameter (Inch) | 1" |
| Outlet Diameter (Inch) | 1" |
